GERD: Symptoms, Causes, Treatments, Remedies for Relief | Flapper Check Valve

The fan pops out of its holder so it can direct the draught upwards towards your face while you explore your holiday hotspot hands-free. 3/5 

Select your interest areas below to sign up for Packaging World newsletters.View newsletter archive »

The area ‘hit the bullseye’ in attributes RagingWire was looking for when planning its Dallas Data Center campus in Garland.

South of RGM concession, the Koemboe Creek anomaly is located near the south border of the Brinks pluton. In 2010 and 2011 this gold anomaly was drilled. In 2011, DD drilling (20 holes, 3,135 m) and RC drilling (33 holes, 1,341 m) were performed in this area. In 2012, a second phase of the DD drilling campaign was performed (21 holes, 3,043 m). Between 2012 and 2013 an additional nine holes were completed for 1,275 m. A Gemcom geological and weathering model was developed in 2013 to complete an initial resource estimate based on the 50 DD holes (7,453 m total diamond drilling). Detailed geological mapping was also carried out over outcrops found along exposed small scale miners areas. Small scale mining has increased dramatically in the Koemboe area over 2012-2013. This mining is destroying outcrops and mining saprolite where gold-bearing structures had been discovered. Surface resources have been affected. Mapping and channel sampling in small scale mine workings identified an anomalous area east of Koemboe. In 2012, three reconnaissance drill holes were completed in East Koemboe for a total of 510 m.

The SurEx 2017 campaign was analysed at Filab, an external laboratory. The procedure is similar to that used at the RGM Laboratory. The only change is the proportion of samples kept after splitting around 300g of coarse material and the 50g sent for assaying.

FIGURE 14-4       PERCENTAGE CHANGE IN OUNCES FOR THE RANGE OF GOLD PRICES BETWEEN US$1,000 AND US$2,000/OZ COMPARED TO THE US$1,500/OZ AU PRICE(Based on MI+I Grade Inside Optimized Shells)

The Saramacca project is a satellite operation to the current RGM mine site. Access to Saramacca will be via a 23 km access road which will connect the southern end of the RGM mine site to Saramacca. The road will be used to transport ROM ore to the mill at Rosebel, transport personnel to work areas at Saramacca, as well as goods and supplies required to sustain the operation. The road has been sized to accommodate the ore haulage trucks; however mining equipment will also be able to use the road when required to transit between Saramacca and current RGM operations.

Residual length composites were evaluated to determine if they should remain in the database. The general concern is that shorter composite intervals may be associated with higher grades, and the direct use of these composites in Mineral Resource estimation may lead to overestimation. This is particularly concerning if the length of the composites is not used as a weight in the estimation; as most general mine planning packages do not allow the use of weighting composite grades by length, this may be a risk in implementation. SRK reviewed the impact of residual composites by comparing the length-weighted average of assay intervals against the unweighted average of composite grades when residual composites of 50% (0.75 m) lengths were removed from the database on a by-domain basis. All domains showed less than 1% impact on the mean grade. Thus, SRK chose to exclude composites shorter than 50% of the composite length (or 0.75 m) in subsequent data analysis and block grade estimation.

A separate section is available for light vehicle maintenance and repairs. The area is serviced by a 5 tonne capacity overhead crane. Machine shop equipment is installed for minor equipment fabrication. Between the truck shop and the light vehicle maintenance area a tool room and maintenance offices are provided.

Consistent with the National Institute for Environment and Development in Suriname (NIMOS) guidance, RGM initiated the ESIA process for the Saramacca project in April 2018 with the submission of an ESIA Terms of Reference (TOR) for the Saramacca project.

Inventor(s): George Andrew Gordon (Frisco, TX) Assignee(s): Majen Tech, LLC (Longview, TX) Law Firm: The Caldwell Firm, LLC (Local + 1 other metros) Application No., Date, Speed: 15924272 on 03/18/2018 (149 days app to issue)

Before the horde of aunts, uncles, friends, and cousins descends upon your humble abode, take a few minutes to make sure you’re ready for the madness.